Selecting the correct seat configuration is a critical step in your custom seat cover purchase. Please make sure your vehicle's seats match the descriptions on our website exactly, and use the terminology guide below to help.
These refer to the most basic configuration of your vehicle's seats. The illustrations below are common configurations. There can be combinations of the above, such as 60/40 seat backs with solid bottoms.
Power driver, manual driver, power passenger, manual passenger
Power driver and power passenger refer to seats with knobs to electronically adjust the seats back and forth.
Manual driver and manual passenger refer to seats where you must physically move the seats to make adjustments.
Fold-Flat Passenger Seat, Folding Pass Seat
Some vehicles have a passenger seat that will fold flat. The seat must fold forward all the way flat, like a table.
Headrests can be removeable/adjustable, where they telescope up and down. In these cases there would be separate headrest covers included (the headrest must be removed to install the seat back cover).
Headrest covers will not accommodate DVD/TV screens unless specifically stated in the description.
DVD Headrest Screens
Headrest covers will accommodate DVD/TV screens only if specifically stated in the description. If you have a DVD screen in a removeable headrest, you will need to disconnect any wires that travel between the headrest and the seat back in order to get the seat back covers on.
Built-in Headrests, Molded Headrests
Headrests can be built-in or molded into the seat back. These do not need separate headrest covers. The seat backrest cover accommodates the modled headrest.
Recessed headrests sink into the seat backrest somewhat. They are common with sport seats.
Non-Recessed headrests sit flush on top of the seat backrest.
If your vehicle's front seats have side airbags, your seat covers must have airbag allowances (flaps) for the airbag to deploy safely and properly. The existance of side airbags on your car seats is usually indicated by a small tag or imprint saying "Side Airbag" or "SRS" on the door side of your seat backs. If your seats have side airbags, please make sure our description of the seat covers you choose indicates side airbags ("w/side airbag"). Please contact us if this is not the case.
Console, Top Console
Consoles are almost always in the middle of the seat row and often open to store items. Folding consoles fold up to become a seat back and fold down to become an armrest, sometimes with cupholders. Console covers are included when they are in the seat cover description. Standalone consoles that are not part of the seat (commonly with 50/50 bucket seats) do not have covers.
Center bottom storage/bottom console
40/20/40 seats with a bottom console have a middle seat bottom (where you sit) that lifts open for storage.
Built-In Seat Belts/Integrated Seat Belts
Vehicles with integrated or built-in seat belts have a shoulder belt that attaches to the top of the seat, rather than the side of the vehicle frame.
Seats with adjustable lumbar have a lever that moves the support in the bottom of the seat back. There are manual lumbar controls (usually a lever) and power lumbar controls (usually a knob or button that moves the support electronically).
On some seats, there is a flap on the back of the seat that attaches the seat back to the seat bottom. This flap prevents the seat cover from being installed, you will have to lift the flap up in order to install the seat cover. This will be notated in the description and instructions on doing this will be provided.
Requires Professional Installation
Some rear seat covers will require the seat to be physically removed to place the cover on properly. In these cases, professional installation is recommended/required for safety reasons. These seats covers will be notated as requiring professional installation.
All custom covers and floor mats are special order and require time to make before shipping. Production times can vary, depending on many factors.
Expected timeframes are provided below, and these are updated every week.
Total production times below (from order to shipping) are up-to-date. Last updated 1/27/23
Custom Car Covers - Approx. 1-2 weeks
Custom Seat Covers - Approx. 1-3 weeks (Tactical cashmere, black delayed, Velour beige delayed, Printed camo may take longer)
Custom Floor Mats - Approx. 1-2 weeks (Loop Dark Blue delayed)
Production times cannot be guaranteed during this time. Thank you for your understanding.
This innovative seat cover includes a pair of our toughest Ballistic seat covers with an integrated MOLLE platform. This allows you to arrange the included 6 pouches where you need them. The pouches are perfect for holding maps, ponchos, pistol magazines, flashlights, compasses, shells, sunglasses, binoculars, you name it!
Tactical seat covers are for front row bucket seats only. This will be 50/50 or 40/20/40 configurations. For matching rear seat covers, please order the Ballistic seat covers.
Custom seat covers are fully custom fit specifically for the Subaru Tribeca and seat configuration selected. We do not sell any universal sized seat covers.
Seat covers install over the existing seats and are designed to allow the use of your original seat functionality, including reclining and folding and access to child seat LATCH brackets.
Manufactured to order, custom seat covers take time for production before they ship. Please review the estimated production times.
Custom seat covers include covers for attached armrests and consoles (standalone armrests and consoles that are not attached to a seat will not have a cover).
Headrest covers are included, and front seat maps pockets are standard for seats that have them originally.
Side airbags are accommodated with side airbag flaps or special breakaway stitching on certain newer model vehicles.
Custom Seat Cover Features
Custom Fit - Designed specifically for your seats
Seat Functionality Preserverd - Recline, fold or slide your seats, even with the seat covers on
Child seat latch brackets are accessible
Front seat map pockets - If your vehicle's seats have map pockets, the seat covers have them too
Headrest covers included
Console covers included - for consoles part of bench/split-bench seats
Armrest covers included - for seat-attached armrests
Airbag compatible - either side airbag flaps or breakaway stitching
We sell only fully custom covers. All of our covers are 100% custom fitted for a particular make, model, year and style. We do not sell any universal covers or "semi-custom" covers. The products on this page are custom fit for the Subaru Tribeca.
All of our custom covers are manufactured to order. Production times vary and are updated on this page. Orders are shipped from Southern California, so allow 1-5 business days for shipping, depending on where you are located.
All products carry at least a one-year manufacturer's warranty.
We sure can. There are a limited number of fabric swatches available, so please narrow down your choices, or ask us for help in selecting fabrics/colors. Please use our online form to contact us. Make sure you provide your mailing address.
In most cases, if your vehicle is not listed, we do not have a cover for it. The pattern database is being updated all the time, particularly for most recent model years. Please ask us if you need help finding your vehicle.
Yes, seat cover pricing is per row. One row includes all covers in the front row (driver and passenger) or all covers in the back row
No, seat cover pricing is per row, so the back seat covers are purchased separately.
We do not carry rear seat covers for every model. Sometimes the design of the rear seats makes it impossible to construct a properly fitting custom seat cover. In most cases, if you do not see rear seat covers, we do not have them. Please ask us if you want to make sure.
For vehicles with side airbags, make sure the seat cover pattern description includes "w/side airbag." The seat cover will have flaps to allow the side airbags to deploy safely and properly.
Center consoles that fold down and are part of the seat have covers. Center consoles that are not part of a seat (such as with 50/50 bucket seats) do not have covers.
Custom seat covers are designed for the car owner to install. Typical installation time is 30-60 minutes for a row of covers. Professional installation is not needed except for patterns noted with "Professional Installation Required" or "Complex Installation." Please visit the installation web page for installation instructions and sample installation videos.
Seat covers are installed over the existing seats. The original seat covers should not be removed. The new seat covers are secured with velcro, elastic, straps and buckles and/or zippers, depending on the vehicle.
No, seat covers can only be purchased as a full set in a row
Products may be returned within 30 days. There is a 15% restocking fee on returns or exchanges. Please see our complete return policy or request a return authorization.
We highly encourage you to select the right fabric/color the first time around. Please ask us if you need help selecting the right cover. Fabric swatches can be sent you you if you are unsure. There is a 15% restocking fee on returns or exchanges. Please see our complete return policy.
We highly encourage you to double-check the options to see that they match your vehicle exactly. Please ask us if you need help selecting the right cover. Fabric swatches can be sent you you if you are unsure. There is a 15% restocking fee on returns or exchanges. Please see our complete return policy.